Semsalant – removing and destroying powder
Samsalant is a very effective and efficient powder that was formulated for the first time in Iran by the factory and laboratories of Som Sazan Chemical Industries Company and in cooperation with the health and pest control department of this company to repel and destroy pests such as snakes, lizards, scorpions. and tarantulas in areas such as factories, road construction and construction workshops, mining facilities, gardens, nurseries, poultry farms, livestock farms, slaughterhouses, hospitals, stations (telecommunications, electricity, gas and railway) and other places that Somehow, the approach of these animals causes health damage and finally, due to the fear and panic of the employees, it damages the preparation of the industries in the production process.
How to use :
Samsalant can be used as a powder or mixed with water (thin or hard paste) depending on the conditions of the place and type of use.
In order to use this powder, one must first study the environment completely and consider all aspects of the work from the point of view of fighting, and in the directions, paths, doors, and entrances where there is a possibility of movement or finding of such pests, it is done in three ways. made :
1- Dusting as Spot Treatment
2- Dusting in Bands
3-Dusting in Entrance
In powder spraying, it is used in places where the possibility of the presence of such pests is higher and has been observed several times so far. In this method, the powder is spread on the surface with a powder sprayer or with a container by hand.
In belt powder spraying, they block the target environment by creating a band of powder. The length of the band is usually 50-60 cm depending on the location. It is better to determine the route before the powder spraying operation. Then moisten the path and sprinkle powder on it until the poison is completely fixed. In order to make it better, the powder-coated band can be sprayed with water. Because mostly in office buildings, warehouses and production halls, such pests enter the building or the environment through open entrance doors or under closed doors. are being worked, the entry way and around the doors should be stabilized with powder spraying for a length of 2-3 meters. The length of this band is 35-40 cm depending on the conditions of the place and its width.
In the case of using the paste method, the powder can be mixed with water until a uniform paste is obtained. Then he used it with the above methods and depending on the conditions.
Physical combat :
In the course of chemical warfare, conducting physical warfare at the same time (combined) such as blocking and closing seams and cracks and rebuilding the building and channel from holes and cracks, using a net between the entrance channels to the halls and finally improving the environment completely is nessessary.
Antidote :
It is atropine sulfate.